Poly Chain® Carbon™ Volt®, the best synchronous belt
+
The EROJOINT® mechanical assembly solution
=
Poly Chain® Carbon™ Volt® EROJOINT® Ultimate, the transmission belt with mechanical assembly
Exclusive to Gates and Tanals
The only power transmission belt with mechanical assembly
EROJOINT® assembly solutions developed by Tanals allow belts to be assembled on site, without dismantling pulleys or axes and to release the transmission. The EROJOINT® and ERO joint® Ultimate solutions developed exclusively on the Poly Chain® Carbon™ Volt® by Tanals, for and with Gates offer practical, fast and unique driving belt assembly solutions.
The cutting shapes of the junction fingers have been engineered for fatigue resistance and maximum tensile strength of the Poly Chain® Carbon™ Volt® material.
The power of Gates combined with the creativity of Tanals.
The outstanding mechanical characteristics of Poly Chain® GT Carbon™ Volt® combined with the innovative patented EROJOINT® Ultimate solution give you the only mechanically assembled power driving belt solution capable of rivaling all competing endless belts in performance.
A sustainable solution able to replace any rubber belt.
(Fits HTD pulleys in case of breakdown).
Poly Chain GT Carbon EROJOINT Ultimate 3D
Always ½ continuous strand: Joints do not transmit stress, mechanical strength equal to half a Poly Chain® Carbon™ Volt® (Tanals patent)
Pulley diameters for Poly Chain® Carbon™ Volt® EROJOINT® Ultimate and Poly Chain® Carbon™ Volt® belts are identical.
- Can be produced in any length to suit all installations
- Can be produced in any width superior or equal to 20 mm
- Compatible with screws and pins (M2 for 8M, M3 for 14M)
Comparison of transmissible torques (in nm)
Productivity gains
Reduced assembly times on automotive production lines:
from 2 hours to 15 min
Installation tools (optional)
Though no specific material is required to assemble the belts, we recommend using our tools, which simplify the procedure and reduce downtimes even further.
Transmission and Operating Data Comparison
Theoretical calculations for an identical lifetime, following DesignFlex® data and Gates USA test on EROJOINT® solutions. Basically, Powergrip® HTD Belts can be replaced by Poly Chain® Carbon Volt EROJOINT®.
Powergrip® GT3 belts can be replaced by Poly Chain Carbon Volt EROJOINT Ultimate.
Assembly with tool
Poly Chain® Carbon™ Volt® is a registered trademark of Gates Corporation (www.gates.com)
Benefits
Swift installation, no machinery disassembly (tensioners, hoods, pulleys, axes...)
These belts are made of patented antistatic fibers that safely transfer static electricity to the carbon traction cords. High mechanical strength for long-lasting troubleshooting.
The Poly Chain® Carbon™ Volt® EROJOINT® belt transmits 30% of the power of a Poly Chain® Carbon™ Volt®, more than a standard rubber belt. Poly Chain® Carbon™ Volt® EROJOINT® Ultimate Belt transmits half the power of a Poly Chain® Carbon™ Volt®, far more than most Synchronous belts.
An optional tool kit offers simple, time-saving assembly.