Mechanical fastening ERO Joint SK® in round and V-belts
Choose your ERO
Mechanical assemblies ERO Joint® SK for round belt and V-belts are available in Polyurethane and Polyester from diameter 6 mm (or 10x6 profile).
The assembly is made by a simple knot. Polyurethane round and V-belts ERO Joint® SK are suitable for power transmission or for transport. In all cases, the mechanical solution ERO Joint® SK is composed by a traction cord to provide the required mechanical resistance (more resistant than any welded belts).
Furthermore, with a soldering iron and a U spare paddle, it is possible to weld the sheath to have continue external surface.
The ERO Joint SK is available in rolls or in pre-cut length.
ADVANTAGES
Fast and easy assembly. With the ERO Joint® SK solution, you reduce the intervention time and production downtime.
The ERO Joint® SK solution is durable, with a high mechanical resistance.
The minimum diameter is preserved.
ERO Joint® SK for round and V-belts are easy to assemble.
Hollow round belt with connector are only used for very low mechanical resistance.
Belts may be spliced and welded on site by using a specific tool according to the splicing and welding procedure.
With mechanical fastening system ERO Joint® you will reduce considerably costs, particularly for belts with high dimension and belts with tensile reinforcement.
Thanks to this new lacing technology, production costs are significantly reduce and the downtime too.
