ERO Joint® HP Flat belts are assembled in the same way as Timing belts.
Image
![Courroie plate alignement des dents](/sites/default/files/styles/large/public/medias/instructions/img-2105.jpg?itok=ti3HdNoh)
Step 1:
Align the teeth.
Teeth must be correctly aligned to avoid damaging Cords during rod insertion.
Image
![Insertion tige filetée](/sites/default/files/styles/large/public/medias/instructions/large-img-3536.jpg?itok=7ibKDcO2)
Step 2:
Insert the rod using a screwdriver and water (as a lubricant) to aid insertion.
For proper alignment, we supply a mounting plate.
Image
![Découpe de la tige](/sites/default/files/styles/large/public/medias/instructions/large-img-2107.jpg?itok=WFOlivz4)
Step 3:
Cut the rod flush with the Belt.
Image
![Rectification de la tige](/sites/default/files/styles/large/public/medias/instructions/large-img-2108.jpg?itok=yirGalwh)
Step 4:
Grind the stem on both sides.
Image
![Vérification finale](/sites/default/files/styles/large/public/medias/instructions/large-img-2112.jpg?itok=SlU-qECW)
Step 5:
Check that the rod does not extend beyond the edges of the Belt.