Skip to main content

Timing belts ERO Joint® Feeder belts

Courroie ERO Joint de margeurs
Courroie ERO Joint de margeurs
Courroie ERO Joint de margeurs
Courroie ERO Joint de margeurs
Courroie ERO Joint de margeurs

The printing press used to manufacture mainly cardboard-based packaging is made up of various compartments, including a belt feeder.
The machine's configuration calls for belts to be installed with a mechanical junction.
The most commonly used version is a belt with a plastic spiral fastener, with very low mechanical strength in the connection area.

TANALS has developed a belt with an ERO Joint® HP joint together with a mounting tool for valuable installation aid.
The ERO Joint® HP largely replaces the plastic clip (Zip Link) thanks to its superior mechanical strength.

The belt is mounted using the holding tool and a locking pin.

Mounting ERO Joint HP belts on feeders
  • Feeder belts are installed in 2 sets of 12 pieces.
  • White polyurethane Synchronous belts, 32 AT 10 - 840 mm, feature a low-stretch textile reinforcement and a green polyamide fabric (PAZ) on teeth.
  • A 3mm red 40 shore A rubber coating (Linatex) is present on the back of the belts to promote adhesion of the cardboard to the belt; a food-grade version (FDA) is available in white Linaplus 45 shore A rubber.
  • Cardboard sheets are vacuumed through 35 holes (centered) by belt.

Do you have a project ?

Contact our experts for a free estimate:

Product type

Your data is intended for TANALS, in its capacity as data controller, in order to respond to your online requests. Your data will be processed in accordance with our Privacy and Cookie Policy.