Documentation
Mechanical fastening system for wide Timing belts
(a new lacing technology)
The EROJOINT® WT mechanical fastening system is specific to wide belts: the fastening pins are located on the back of the belt, leaving the possibility of machining the teeth. Plastic pins can also be used.
The EROJOINT® mechanical joint is available in widths from 100mm to 1800mm.
EROJOINT® WT is compatible with all types of coating (Supergrip, Linatex, PU, Sylomer, etc.) and all types of guiding.
| EROJOINT® WT | EROJOINT® HP | EROJOINT® (standard) | |
|---|---|---|---|
| WT - Wide Timing | HP = Hinge Pin | Like the Pin Joint/Lock system | |
| Pitch | WT10 - WH | T10 - AT10 - H - T20 - AT20 - 8M - 14M | T10 - AT10 - 8M - 14M |
| Width | 150mm to 1828mm | 10 mm to 450mm | 16mm to 100mm |
| Permissible tensile force | 400N for 150mm width (customer data) | Like welded belts (1170N/25mm T10) (1871N / 25mm AT10) | Very low (300N / 25mm T10) (300N / 25mm AT10) |
| Principle | 3 flat pins | 1 hinge pin | 7 to 10 pins |
Fast and easy assembly
Thanks to this new mechanical fastening system, production downtime is optimized by reducing maintenance time.
- The recommended minimum pulley diameter is 50 mm.
- EROJOINT® WT is compatible with conveyor belts scrapers.
- EROJOINT® WT mechanical fastening systems are durable solutions.
- The shape of the EROJOINT® WT can be adapted to increase mechanical strength.
- EROJOINT® WT is the only mechanical fastening solution for wide Timing belts.
- EROJOINT® WT splices for wide belts are assembled in our production workshop, using a patented procedure, and manufactured to the desired length.