With the ERO Joint® solution, you no longer need to call in a subcontractor to assemble your belts and Conveyor Belts, or to weld them on site.
The ERO Joint® mechanical splicing system enables you to replace your belts without having to dismantle the axes and protective covers of your machines, or even master the welding process.
We take care of your production and your products. A specific rubber belt cleaning process approved by tire manufacturers guarantees that there is no pollution of the rubber being transported, and therefore no disruption to vulcanization.
In the tire industry, our two solutions, ERO Joint® HP and ERO Joint® WT, have demonstrated numerous benefits, such as reduced downtime costs and increased maintenance efficiency at every stage of tire production.
ERO Joint® WT wide Timing belt with PAZ coating and longitudinal splice (Photo Michelin)
We can offer this solution from widths of 100 to 1600 mm, on T10 and H pitches as standard.
This mechanical splice for wide timing belts uses 3 flat pins inserted directly on the back of the belt to quickly close the belt.
Timing belt 325 WT10 7500 ERO Joint® WT for rubber conveying / vulcanization processes
Assembled in the same way as the previous Belt, the production conditions are the same.
550 WT10 5820 ERO Joint® WT wide belt with longitudinal drive guide
Installation and manufacturing conditions are the same as for the first Belt. In addition, the belt is cleaned using a specially approved process to prevent contamination of the rubber being conveyed.
ERO Joint® felt belt - Calendering process
We can install ERO Joint® on virtually any type of polyurethane, PVC or felt conveyor belt. In this way, you benefit from rapid assembly without the need for staples, which can damage the product being conveyed.
Widths from 100 to 3000 mm.
ERO Joint® HP quick-fit belt
ERO Joint HP is available in T5, AT5, H, T10, AT10, T20, AT20, 8M and 14M pitches. Widths from 7 mm to 300 mm (and more on request).
Mechanical strength is particularly high thanks to Cords reinforcement.
180 WT10 4730 ERO Joint® HP wide belt with back grinding for rubber conveying. Vulcanization process
Same conditions as above.
Belt tensioning and assembly tools for small center distances and installations without tensioning systems.
To facilitate assembly, we offer a full range of tools.